Gave up on Clear Case

Well, I unfortunately had to give up on the clear case. When I started to cut out the small inserts in the front of the case for the buttons, it was nearly impossible to cut, then wound up cracking since the plastic was so hard and brittle.

So... back to the hardware store for new material! I found some 3mm thick (about twice as thick as what I wanted to match the engraving plastic mentioned in the book) PVC sheeting that was in a variety of colors, so I bought a black sheet and a blue sheet. I also bought a roll of screening in order to have some in front of the speaker.

I cut out the new front, here is what it looks like: